Premium Automotive Film
Premium Automotive Film
100% Genuine USA made product
A range of exciting automotive window film in modern colors and shades that match the latest factory tints adding a stylish, sophisticated look to your car. XCool provides high tech metalized and sputtered metal automotive films for vehicles with total solar energy rejection up to 60% that will reduce the strain on your car air conditioner. The 99%+ UV block will prevent damage from harmful radiation while ensuring that the fabrics and trim do not fade. XCool has a special spectrally selective windscreen film which reduces heat, UV and glare while being non-interfering with GPS signals.
XCool films provide excellent optical clarity while reducing glare by day or night. The five year warranty covers peeling, cracking, de-lamination, de-metallization and fading.
Block UV & Heat
Helps block UV Radiation, Visible Light & Heat. Prevents fading of interior fabrics and trim. Improves the air-conditioning efficiency and keeps the car cool.
Increase Comfort
99% UV Protection – Reduce the risk of skin cancer and other damaging effects. Solar heat rejection upto 75% – Creates uniform interior temperature.
Reduce Glare
Reduce the annoying glare from the sun. Improves visibility and enhance driving conditions
Solar Energy Technicals
Visible Light Transmittance (VLT)
The ratio of the amount of total visible solar energy (380-780 nanometers) that is allowed to pass through a glazing system to the amount of total visible solar energy falling in the glazing system. The VLT is different for window and automotive films depending upon the degree of tint, type of film whether metalized, dyed or spectral selective. While VLT normally varies between 5% and 90%, most films are between 20% and 70% depending upon Road Transport regulations of the city or country. The higher the VLT the more light is transmitted. A high VLT is desirable to maximize daylight into homes and offices. In addition windscreen films should have high VLT to maintain good visibility during night and bad weather. Glare is also influenced by visible light transmittance through a glazing system. The lower the number, less the visible solar light transmitted.
Visible Light Reflectance (VLR)
The percent of total visible light that is reflected by the window film/glass system.
The lower the number the less visible light reflected.
Total Solar Transmittance
The ratio of the amount of total solar energy in the full solar wavelength range (300- 2100 + nanometres) that is allowed to pass through a glazing system to the amount of total solar energy falling on that glazing system.
The lower the number, the less solar radiation transmitted.
Total Solar Energy Rejected (TSER)
The percentage of total solar energy (heat) rejected by the window film/glass system.
The higher the number, more total solar energy (heat) rejected.
This is the only key measure of the film performance.
Ultra-Violet (UV) Transmittance (UVT)
The ratio of the amount of total UV solar energy (100-380 nanometres) that is allowed to pass through a glazing system to the amount of total UV solar energy falling on the glazing system.
Ultra- violet is one portion of the total solar energy spectrum, which greatly contributes to
fading and deterioration of fabric and furnishings.
The lower the number, the less ultraviolet transmitted.
About XCool
Add a stylish, sophisticated look with a wide range of tints.
High tech dyed, metalized, sputtered & ceramic automotive films.
Complete product range from economy to state of the art.
Spectral Selective windscreen films.
Manufactured in the USA.
USA Manufacturers are world leaders in production of high quality Automotive Films.
Provide excellent optical clarity with UV protection of 99%+.
Ceramic film are non-interfering with GPS/phone signals.
Ceramic films provide high heat rejection with high VLT.
Low int./ext. Reflectivity films reduce glare by day or night.
5 Year + Warranty against Peeling, cracking, delamination, de-metallization and fading.
High total solar energy rejection up to 70%, at reasonable cost.
Value Plus Series:
A range of exciting automotive window film in modern vibrant colours and shades
XP Charcoal 35, VLT 38%
Specialty Series:
High VLT, High Solar Energy Rejection films for the Car or Windscreen uses new film manufacturing technology – Spectral Selective,
ULT 70, VLT 70%
Premium Series:
High tech, ultra-high quality metalized and sputtered films with sophisticated colours for luxury automobiles
Neutral 30, VLT 35%
Grey 70, VLT 5%
Superior High Performance Series
Add a stylish, sophisticated look with very high quality metalized films
Grey 30/50, VLT 30/15%
Charcoal 30, VLT 35%
What happens in a high impact Automobile Accident?
Keep Your Family Safe
In an automobile accident, the glass shatters, and the fragments can cause serious injury.
XDS CERAMIC FILMS
Space age Nano technology to provide the highest total solar energy rejection.
Total Solar Rejection up to 70%, UV protection of 99%+.
IR rejection of 95+%.
No interference with mobile phone and GPS signals as films are non-metallic.
Does not contain dyes that can cause discoloration or corrosion of film over time.
Uses futuristic materials to minimize the process of heat transfer more efficiently than conventional films.
Unparalleled 6 Year warranty against peeling, cracking, de-lamination, discoloration and fading.
Excellent optical clarity reduces glare during the day or night reduces eye fatigue.
Sophisticated and stylish colors and shades.
XDS CERAMIC Film Specification Sheet
AUTOMOTIVE
XDS CERAMIC GRAPHITE 30
XDS – CR CGP30
PERFORMANCE RESULT
- LIGHT TRANSMISSION (%) 36.0
- TOTAL SOLAR ENERGY REJECTED(%) 61.0
- VISIBLE LIGHT REFLECTANCE (%) 10.0
- UV REJECTED (%) 99.0
- IR REJECTION 97.0
AUTOMOTIVE
XDS CERAMIC GRAPHITE 50
XDS – CR GP50
PERFORMANCE RESULT
- LIGHT TRANSMISSION (%) 15.0
- TOTAL SOLAR ENERGY REJECTED(%) 66.0
- VISIBLE LIGHT REFLECTANCE (%) 4.8
- UV REJECTED (%) 99.0
- IR REJECTION 98.0
AUTOMOTIVE
XDS CERAMIC GRAPHITE 70
XDS – CR CRGP70
PERFORMANCE RESULT
- LIGHT TRANSMISSION (%) 8.0
- TOTAL SOLAR ENERGY REJECTED(%) 70.0
- VISIBLE LIGHT REFLECTANCE (%) 5.0
- UV REJECTED (%) 99.0
- IR REJECTION 82.0
AUTOMOTIVE
XDS CERAMIC XCERA
XDS – XCRW
PERFORMANCE RESULT
- LIGHT TRANSMISSION (%) 70.0
- TOTAL SOLAR ENERGY REJECTED(%) 54.0
- VISIBLE LIGHT REFLECTANCE (%) 10.0
- UV REJECTED (%) 99.0
- IR REJECTION 73.0
NOTES
All performance results values are based on the film installed on the inside surface of 1/4″ (6mm) thick, clear glass. XDS warranty coverage details are available by contacting your regional XDS Dealer / Distributor. XDS is not responsible for damage caused by improper or uncertified installation.
Glossary of terms
U-Value (winter)
The ability for heat to transfer through 1 square foot of window film for each 1ºF difference in temperature. It is dependent upon the local climate or environment that the window is located in effects the level of heat transfer and the rate; in winter, heat transfers from the indoor air to outdoor air. The lower the U-Value, the better insulating qualities of the window film/glass system.
Shading Coefficient
The ratio of the solar heat gain through a given glazing system to the solar heat gain under the same conditions for clear, non-shaded, double strength window glass. Shading coefficient defines the sun control capability of the glazing system. The lower the number, the better solar shading qualities of the window film/glass system.
Ultra-Violet (UV) Transmittance
The ratio of the amount of total UV solar energy (300-380 nanometers) that is allowed to pass through a glazing system to the amount of total UV solar energy falling on the glazing system. Ultra- violet is one portion of the total solar energy spectrum, which greatly contributes to fading and deterioration of fabric and furnishings. The lower the number, the less ultraviolet transmitted.
Total Solar Energy Rejected
The percentage of total solar energy (heat) rejected by the window film/glass system. The higher the number, more total solar energy (heat) rejected. It is the combined effect of all heat transmitted, absorbed or reflected and therefore the most reliable benchmark.
Total Solar Transmittance
The ratio of the amount of total solar energy in the full solar wavelength range (300-2100 nanometers) that is allowed to pass through a glazing system to the amount of total solar energy falling on that glazing system. The lower the number, less the solar radiation transmitted.
Total Solar Absorbance
The ratio of the amount of total solar energy absorbed by a glazing system to the amount of total solar energy falling on the glazing system. Solar absorption is that portion of total solar energy neither transmitted nor reflected. Since solar transmittance and solar reflectance are measured directly, the following equation should be used in calculating solar absorbance: Solar absorbance = 1.00 (solar transmittance) – (solar reflectance). The lower the number, less the radiation absorbed.
Total Solar Reflectance
The ratio of total solar energy, which is reflected outward by the glazing system to the total amount of total solar energy falling on that glazing system. On filmed windows this reflectance is a function of the side of the film facing the window surface. The lower the number less the solar radiation reflected.
Visible Light Transmittance (VLT)
The ratio of the amount of total visible solar energy (380-780 nanometers) that is allowed to pass through a glazing system to the amount of total visible solar energy falling in the glazing system. The VLT is different for window and automotive films depending upon the degree of tint, type of film whether metalized, dyed or spectral selective. While VLT normally varies between 5% and 90%, most films are between 20% and 70% depending upon Road Transport regulations of the city or country. The higher the VLT the more light is transmitted. A high VLT is desirable to maximize daylight into homes and offices. In addition windscreen films should have high VLT to maintain good visibility during night and bad weather. Glare is also influenced by visible light transmittance through a glazing system. The lower the number, less the visible solar light transmitted.
Visible Light Reflectance (Exterior)
The percent of total visible light that is reflected by the window film/glass system. The lower the number, less the visible light reflected.
XDS GPS Car Kit
Glass Protection System - Automobile Installation Kit
The car kits are available in two configurations. Principal advantage is low stock cost while offering variety to customers. Currently the kits are available in Clear and Charcoal 15%, Charcoal 35% and Charcoal 50%. Bulk orders in any color from the XDS shade card can be supplied.
XDS Protekt
Designed for protection against UV radiation, solar heat, accidental shattering, fire and flying glass during major accidents. The XDS Protekt Car Kit uses extremely high grade 100 micron tinted scratch resistant security film manufactured in the USA with XDS proprietary chemical GPS9 as part of the XDS Glass Protection System.
XDS Protekt Plus
Extra protection against burglary, vandalism, riots and bomb blasts along with the standard benefits of UV and solar heat protection, prevention of accidental shattering and protection from flying glass during accidents. The XDS Protekt Plus Car Kit uses top grade high performance scratch resistant 200 micron tinted film for the side windows and color matched 100 micron tinted film for the rear window. The films, manufactured in the USA, form the XDS Glass Protection System along with the proprietary chemical GPS9.
5 Year Limited Warranty
Both kits come with a limited 5 year warranty.
